All Categories
    Brand: Zendo

    Zendo FLAT END TAPER 10 sterile diamond burs 172-018C

    Zendo Select pre sterilized FG Diamond Burs have a highly specialized coating process more than doubles the strength of the diamond bonding to the surface resulting in superior performance and enabling sharp, long lasting, smooth cutting ability.

    Package contains

    10 sterile diamond burs
    Flat end taper shaped tip
    Head length 8.5 mm
    18 mm Head size - Coarse Grit

    Key Features

    Hardened Stainless Steel Shank Zendo SELECT's bur shanks are Swiss-made and are made from heat-treated stainless steel, maintaining the strictest tolerances on shank diameter and making them vibration free.

    Accurate Preparations in Less Time: The exceptional diamond coating process more than doubles the strength of the diamond bonding to the shank for superior performance enabling Zendo’s SELECT Diamond burs to cut smoothly and rapidly, leaving a sharply demarcated preparation.

    Sterilized in Single Sleeves: Zendo’s SELECT Sterile FG Diamond Burs are packed in a Class 10 Clean Room then Gamma Radiated. The gamma symbol on each package ensures 5 years sterilization validity. Each SELECT diamond bur is separately packaged in its own sleeve, clearly marked with the catalogue number which identifies the burs unique characteristics size and grit.
    Part Number: 931172018
    Customers who bought this item also bought

    Zendo SELECT SIL FIRM PUTTY, BLUE, FAST SET 2 containers of 400g each + 2 mixing spoons

    Select Sil Firm Putty is used as a base impression material for the putty/wash impression technique in conjunction with Select Sil Light Body Super Hydrophilic.

    Select Sil Firm Putty is a kneadable precision impression material based on addition curing vinyl silicone. Select Sil Firm Putty is easy to mix and not sticky.

    It comes in 2 containers of 400G each.

    Handling instructions:

    • Perforated or non-perforated metal or plastic trays may be used with Select Sil Firm Putty. In order to improve adhesion of Select Sil Firm Putty to the tray, a suitable adhesive should be applied according to the corresponding instructions before loading the impression tray. Use equal parts (volume or weight) of base paste and catalyst paste. Take the base paste with the dark measuring spoon and the catalyst paste with the white measuring spoon. Knead until the colour is homogeneous (at least 30 seconds). Load the ready kneaded material into the prepared tray. Insert the loaded tray in the mouth not later than 1:30 minutes (working time at 23°C or 74°F) after start of mix. Maintain position for at least 2 minutes. The fast set takes 2 minutes to set.


    • Superior hydrophilic wettability and detail in the sulcus area
    • Unsurpassed dimensional stability for improved accuracy and tear strength
    • Fast intra oral set times to reduce your patients’ discomfort
    • Outstanding elastic recovery - keeps its shape after removal from patients’ mouth
    • Won't distort or expand in disinfecting solutions

    Package contains:

    • Zendo SELECT SIL FIRM PUTTY, BLUE, FAST SET 2 containers of 400g each + 2 mixing spoons

    Zendo SELECT TRANSBITE 2 cartridges 1:1 of 50 ml each + 6 mixing canula

    Select TransBite is a transparent bite registration material based on addition curing vinyl silicones for fast and precise bite registration. Because of the transparency the occlusion can be visually observed. It is also excellent suitable as a transparent matrix material for light curing composite. With the Automix-cartridge Select TransBite can be syringed free of bubbles directly onto the teeth.

    It comes in a convenient cartridge system with 2 cartridges of 50 ml each and 6 mixing canula.

    Handling instructions:

    • The automatically mixed material is applied directly onto the occlusal areas. The bite should be closed within 25 seconds after the beginning of the extruding (working or application time at 23°C or 74 °C). The recommended time in mouth is about 1:20 minutes.


    • Transparent bite registration material
    • Fabrication of occlusal templates and labial matrices for light and cured composite restorations and chairside veneers
    • Fabrication of transmission impressions for orthodontic brackets using the indirect technique
    • 2-minute set times in mouth minimizing patient discomfort and potential for distortion
    • Outstanding elastic recovery, unsurpassed compression

    Package contains:

    • Zendo SELECT TRANSBITE 2 cartridges 1:1 of 50 ml each + 6 mixing canula

    Zendo SELECT SUPRATEMP 10:1, A2, 1x 50 ml cartridge + 10 mixing tips

    Select SupraTemp 10:1 is an automatically mixed two component material in cartridges based on multifunctional methacrylic esters. It is a very easy and comfortable material for creating short- and long-term temporary crowns or bridges, inlays, onlays and veneers. Because of its flexibility, the material is especially suitable for longer bridge spans. It shows fluorescence in UV-light. It is free of methyl methacrylate.

    Select SupraTemp is the ideal temporary crown and bridge material. It's perfectly suited for everything from single unit crowns to long span bridges due to its high strength AND flexibility. It polishes to a high, natural looking gloss and resists staining longer than other provisional materials.

    Available Shades:

    • A1, A2, A3, A3.5, B1, B3, C2 and bleach.

    Handling instructions:

    • Select Supratemp 10:1 is automatically mixed when dispensed with slight and even pressure directly into the situation impression made before. Filling should occur from bottom upward to prevent voids.


    • Polishes to a ceramic like finish
    • Low exothermic reaction
    • Naturally fluorescent
    • Fast procedure time
    • Methyl methacrylate free

    Package contains:

    • Zendo SELECT SUPRATEMP 10:1, A2, 50 ML Cartridge +10 tips